Display of shell thickness contour incorrect for final step?
issueid=599 11-27-2012 10:55 AM
Display of shell thickness contour incorrect for final step?
Display of shell thickness contour incorrect for final step?

Attached are 4 pictures whereby the outermesh surfaces are coloured towards shell thickness in PostView (version 1.4.2, Windows 7).

If I hit f5 to update the results it seems that when I display the last finished timestep the shell thickness of the indentor is partially zero as the pictures shows (which is not correct). However when I update again if another timestep is finished that same timestep we were studying now seems to display properly and the zero thicknesses have vanished. It seems the final timestep always has an inappropriate shell thickness display which becomes overwritten with what seems correct values once the simulation has advanced beyond this point.

I've also attached the model I was running. The elements that display with zero thickness vary which is also odd.

Thanks,


Kevin
Issue Details
Issue Number 599
Project PostView
Category Unknown
Status Unconfirmed
Priority Unknown
Affected Version Unknown
Fixed Version (none)
Users able to reproduce bug 0
Users unable to reproduce bug 0
Assigned Users (none)
Tags (none)




11-27-2012 11:05 AM
Uploading of attachments did not work, I'll try again later.

Kevin

+ Reply